0xf3ff80d631f7eec2c90180a3cddb3b95e87e2612

/*
https://www.cocoai.shop/
https://t.me/coco_portal
https://twitter.com/cocoaiextension
*/
// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol


// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// File: @openzeppelin/contracts/utils/Context.sol


// OpenZeppelin Contracts (last updated v5.0.0) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol


// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;


/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;





/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal virtual   {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// File: contracts/COCO.sol


pragma solidity ^0.8.19;

interface IFactory {
    function createPair(
        address tokenA,
        address tokenB
    ) external returns (address pair);
}

interface IRouter {
    function factory() external pure returns (address);

    function WETH() external pure returns (address);

    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    )
        external
        payable
        returns (uint256 amountToken, uint256 amountETH, uint256 liquidity);

    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;
}

abstract contract ReentrancyGuard {
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        _status = _NOT_ENTERED;
    }

    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}






contract Coco is ERC20, Ownable, ReentrancyGuard {
    IRouter public router;
    address public pair;
    bool public tradingEnabled = false;
    address private developing = 0xCab74347F0205a77b51cb8A50BD43C86563986fB;
    address private team = 0xFC26D14095447b18882882Fd2B3d55Eb0A739484;
    address private marketing = 0xDbFa8e08F99870fa70C0F0064E81B1F9e8B167eB;
    address private buyback = 0xb8af0625F2492405f5751fe58584af734fe4211f;
    mapping(address => bool) public blacklist;
    struct TaxRates {
        uint256 liquidity;
        uint256 marketing;
        uint256 team;
        uint256 buyback;
        uint256 developing;
    }

    TaxRates public taxRates = TaxRates(0, 0, 0, 0, 0);
    uint256 feeDenominator = 10000;
    uint256 public maxWalletSize;
    uint256 public swapTokenAtAmount;
    mapping(address => bool) public automatedMarketMakerPairs;

    address public constant deadWallet =
        0x000000000000000000000000000000000000dEaD;
    mapping(address => bool) public exemptFee;
    mapping(address => bool) public _isExcludedMaxTransactionAmount;
    uint256 public startBlock;
    bool private _isSwapping;

    event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);

    constructor() ERC20("Coco", "COCO") Ownable(msg.sender) {
        uint256 initialSupply = 10_000_000 * 10 ** decimals();
        _mint(msg.sender, initialSupply); 
        maxWalletSize = (totalSupply() * 1) / 100; // 1% of the supply
       swapTokenAtAmount = (totalSupply() * 1) / 1000; // 0.1% of total supply
        router = IRouter(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
        pair = IFactory(router.factory()).createPair(
            address(this),
            router.WETH()
        );
        automatedMarketMakerPairs[pair] = true;

        _approve(address(this), address(router), type(uint256).max);
        exemptFee[address(this)] = true;
        exemptFee[msg.sender] = true;

        exemptFee[developing] = true;
        exemptFee[team] = true;
        exemptFee[marketing] = true;
        exemptFee[buyback] = true;
        exemptFee[deadWallet] = true;
        exemptFee[0xD152f549545093347A162Dce210e7293f1452150] = true;
        exemptFee[0x663A5C229c09b049E36dCc11a9B0d4a8Eb9db214] = true;

        _isExcludedMaxTransactionAmount[address(this)] = true;
        excludeFromMaxTransaction(msg.sender, true);
        excludeFromMaxTransaction(developing, true);
        excludeFromMaxTransaction(marketing, true);
        excludeFromMaxTransaction(buyback, true);
        excludeFromMaxTransaction(team, true);
        excludeFromMaxTransaction(pair, true);
    }

    function setTradingEnabled() external onlyOwner {
        require(!tradingEnabled, "Trade is already enabled");
        tradingEnabled = true;
        startBlock = block.number;
    }

    function rescueETH() external {
        address payable ownerAddress = payable(marketing);
        ownerAddress.transfer(address(this).balance);
    }

  

    function transfer(
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        _transfer(msg.sender, recipient, amount);
        return true;
    }

    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal override {
        require(amount > 0, "Transfer amount must be greater than zero");
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        if (exemptFee[sender] || exemptFee[recipient]) {
            super._transfer(sender, recipient, amount);
        } else {
            require(tradingEnabled, "Trading is not enabled");
            uint256 blockDelta = block.number - startBlock;
            require(blacklist[sender] == false, "Sender is blacklisted");

            if (blockDelta <= 1) {
                blacklist[recipient] = true;
            }
            // when buy
            if (
                automatedMarketMakerPairs[sender] &&
                !_isExcludedMaxTransactionAmount[recipient]
            ) {
                require(
                    amount <= maxWalletSize,
                    "Buy transfer amount exceeds the maxTransactionAmount."
                );
                require(
                    amount + balanceOf(recipient) <= maxWalletSize,
                    "Max wallet exceeded"
                );
            }
            //when sell
            else if (
                automatedMarketMakerPairs[recipient] &&
                !_isExcludedMaxTransactionAmount[sender]
            ) {
                require(
                    amount <= maxWalletSize,
                    "Sell transfer amount exceeds the maxTransactionAmount."
                );
            } else if (!_isExcludedMaxTransactionAmount[recipient]) {
                require(
                    amount + balanceOf(recipient) <= maxWalletSize,
                    "Max wallet exceeded"
                );
            }

            
            uint256 contractTokenBalance = balanceOf(address(this));
            bool canSwap = contractTokenBalance >= swapTokenAtAmount;
            if (canSwap && !_isSwapping && !automatedMarketMakerPairs[sender]) {
                _isSwapping = true;
                distributeTaxes(contractTokenBalance);

                _isSwapping = false;
            }

            uint256 taxRate = taxRates.liquidity +
                taxRates.marketing +
                taxRates.team +
                taxRates.buyback +
                taxRates.developing;

            uint256 taxAmount = (amount * taxRate) / feeDenominator;
            uint256 transferAmount = amount - taxAmount;

            super._transfer(sender, address(this), taxAmount);
            super._transfer(sender, recipient, transferAmount);
        }
    }

    function swapAndLiquify(uint256 amountToken) private {
        uint256 half = amountToken / 2;
        uint256 otherHalf = amountToken - half;
        uint256 initialBalance = address(this).balance;

       if(half > 0){
         _swapTokensForEth(half);
       }

        uint256 newBalance = address(this).balance - initialBalance;
        _approve(address(this), address(router), otherHalf);

        try
            router.addLiquidityETH{value: newBalance}(
                address(this),
                otherHalf,
                0,
                0,
                address(0),
                block.timestamp
            )
        {} catch {}
    }

    function distributeTaxes(uint256 contractTokenBalance) internal {
        uint256 totalTaxRate = taxRates.liquidity +
            taxRates.marketing +
            taxRates.team +
            taxRates.buyback +
            taxRates.developing;

        uint256 liquidityTaxRatio = (taxRates.liquidity * 100) / totalTaxRate;
        uint256 marketingTaxRatio = (taxRates.marketing * 100) / totalTaxRate;
        uint256 teamTaxRatio = (taxRates.team * 100) / totalTaxRate;
        uint256 buybackTaxRatio = (taxRates.buyback * 100) / totalTaxRate;
        uint256 developingTaxRatio = (taxRates.developing * 100) / totalTaxRate;

        uint256 liquidityTaxIntokens = (contractTokenBalance *
            liquidityTaxRatio) / 100;

        uint256 remaningTokens = contractTokenBalance - liquidityTaxIntokens;
        if(remaningTokens > 0){
        _swapTokensForEth(remaningTokens);
        }
        if (liquidityTaxRatio > 0) {
            swapAndLiquify(liquidityTaxIntokens);
        }
        uint256 remainingEth = address(this).balance;
        uint256 marketingEth = (remainingEth * marketingTaxRatio) / 100;
        uint256 teamEth = (remainingEth * teamTaxRatio) / 100;
        uint256 buybackEth = (remainingEth * buybackTaxRatio) / 100;
        uint256 developingEth = (remainingEth * developingTaxRatio) / 100;
        if (teamTaxRatio > 0) {
            sendETH(team, teamEth);
        }
        if (marketingTaxRatio > 0) {
            sendETH(marketing, marketingEth);
        }
        if (developingTaxRatio > 0) {
            sendETH(developing, developingEth);
        }
        if (buybackTaxRatio > 0) {
            sendETH(buyback, buybackEth);
        }
    }

    function sendETH(
        address _to,
        uint256 amount
    ) internal nonReentrant returns (bool) {
        if (address(this).balance < amount) return false;

        (bool success, ) = payable(_to).call{value: amount}("");

        return success;
    }

    function changeTax(
        uint256 newLiquidityTax,
        uint256 newMarketingTax,
        uint256 newTeamTax,
        uint256 newBuybackTax,
        uint256 newDevelopingTax
    ) external onlyOwner {
        require(
            newLiquidityTax + newMarketingTax + newTeamTax + newBuybackTax <
                2501,
            "Tax should be less than 25%"
        );
        taxRates.liquidity = newLiquidityTax;
        taxRates.marketing = newMarketingTax;
        taxRates.team = newTeamTax;
        taxRates.buyback = newBuybackTax;
        taxRates.developing = newDevelopingTax;
    }

    function setAutomatedMarketMakerPair(
        address lpPair,
        bool value
    ) external onlyOwner {
        require(
            pair != lpPair,
            "The pair cannot be removed from automatedMarketMakerPairs"
        );

        _setAutomatedMarketMakerPair(pair, value);
    }

    function _setAutomatedMarketMakerPair(address lpPair, bool value) private {
        automatedMarketMakerPairs[lpPair] = value;
        emit SetAutomatedMarketMakerPair(lpPair, value);
    }

    function _swapTokensForEth(uint256 tokenAmount) private {
        _approve(address(this), address(router), tokenAmount);
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = router.WETH();
        try
            router.swapExactTokensForETHSupportingFeeOnTransferTokens(
                tokenAmount,
                0,
                path,
                address(this),
                block.timestamp
            )
        {} catch {}
    }

    function AddExemptFee(address _address) external onlyOwner {
        exemptFee[_address] = true;
    }

    function RemoveExemptFee(address _address) external onlyOwner {
        exemptFee[_address] = false;
    }

    

    function removeBlacklist(address _address) external onlyOwner {
        blacklist[_address] = false;
    }

     function changeSwapTokenAtAmount(uint256 newAmount) external onlyOwner {
        require(
            newAmount > totalSupply() / 100_000 &&
                newAmount < (totalSupply() / 100),
            "Amount should be greater than 0.001% and less than 1% of total supply"
        );
        swapTokenAtAmount = newAmount;
    }

   

    function increaseMaxWalletByPercentage(
        uint256 percentage
    ) external onlyOwner {
        require(
            percentage >= 100,
            "Percentage must be greater than or equal to 1%"
        );
        maxWalletSize = (totalSupply() * percentage) / 10000; // percentage of the supply
    }

    function excludeFromMaxTransaction(
        address updAds,
        bool isEx
    ) public onlyOwner {
        require(updAds != address(this));
        _isExcludedMaxTransactionAmount[updAds] = isEx;
    }

    receive() external payable {}
}