0xd5c2bd6777250188b34d77c82e46838b602b06a3

/*
  ･
   *　★
      ･ ｡
        　･　ﾟ☆ ｡
  　　　 *　★ ﾟ･｡ *  ｡
          　　* ☆ ｡･ﾟ*.｡
      　　　ﾟ *.｡☆｡★　･
​
                      `                     .-:::::-.`              `-::---...```
                     `-:`               .:+ssssoooo++//:.`       .-/+shhhhhhhhhhhhhyyyssooo:
                    .--::.            .+ossso+/////++/:://-`   .////+shhhhhhhhhhhhhhhhhhhhhy
                  `-----::.         `/+////+++///+++/:--:/+/-  -////+shhhhhhhhhhhhhhhhhhhhhy
                 `------:::-`      `//-.``.-/+ooosso+:-.-/oso- -////+shhhhhhhhhhhhhhhhhhhhhy
                .--------:::-`     :+:.`  .-/osyyyyyyso++syhyo.-////+shhhhhhhhhhhhhhhhhhhhhy
              `-----------:::-.    +o+:-.-:/oyhhhhhhdhhhhhdddy:-////+shhhhhhhhhhhhhhhhhhhhhy
             .------------::::--  `oys+/::/+shhhhhhhdddddddddy/-////+shhhhhhhhhhhhhhhhhhhhhy
            .--------------:::::-` +ys+////+yhhhhhhhddddddddhy:-////+yhhhhhhhhhhhhhhhhhhhhhy
          `----------------::::::-`.ss+/:::+oyhhhhhhhhhhhhhhho`-////+shhhhhhhhhhhhhhhhhhhhhy
         .------------------:::::::.-so//::/+osyyyhhhhhhhhhys` -////+shhhhhhhhhhhhhhhhhhhhhy
       `.-------------------::/:::::..+o+////+oosssyyyyyyys+`  .////+shhhhhhhhhhhhhhhhhhhhhy
       .--------------------::/:::.`   -+o++++++oooosssss/.     `-//+shhhhhhhhhhhhhhhhhhhhyo
     .-------   ``````.......--`        `-/+ooooosso+/-`          `./++++///:::--...``hhhhyo
                                              `````
   *　
      ･ ｡
　　　　･　　ﾟ☆ ｡
  　　　 *　★ ﾟ･｡ *  ｡
          　　* ☆ ｡･ﾟ*.｡
      　　　ﾟ *.｡☆｡★　･
    *　　ﾟ｡·*･｡ ﾟ*
  　　　☆ﾟ･｡°*. ﾟ
　 ･ ﾟ*｡･ﾟ★｡
　　･ *ﾟ｡　　 *
　･ﾟ*｡★･
 ☆∴｡　*
･ ｡
*/

// SPDX-License-Identifier: MIT OR Apache-2.0

pragma solidity ^0.8.0;

import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/proxy/Clones.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "./interfaces/IERC20Approve.sol";
import "./libraries/BytesLibrary.sol";

/**
 * @notice Deploys contracts which auto-forwards any ETH sent to it to a list of recipients
 * considering their percent share of the payment received.
 * @dev Uses create2 counterfactual addresses so that the destination is known from the terms of the split.
 */
contract PercentSplitETH is Initializable {
  using AddressUpgradeable for address payable;
  using AddressUpgradeable for address;
  using BytesLibrary for bytes;
  using SafeMath for uint256;

  struct Share {
    address payable recipient;
    uint256 percentInBasisPoints;
  }

  uint256 internal constant BASIS_POINTS = 10000;

  Share[] private _shares;

  event PercentSplitCreated(address indexed contractAddress);
  event PercentSplitShare(address indexed recipient, uint256 percentInBasisPoints);
  event ETHTransferred(address indexed account, uint256 amount);
  event ERC20Transferred(address indexed erc20Contract, address indexed account, uint256 amount);

  /**
   * @dev Requires that the msg.sender is one of the recipients in this split.
   */
  modifier onlyRecipient() {
    for (uint256 i = 0; i < _shares.length; i++) {
      if (_shares[i].recipient == msg.sender) {
        _;
        return;
      }
    }
    revert("Split: Can only be called by one of the recipients");
  }

  /**
   * @notice Creates a new minimal proxy contract and initializes it with the given split terms.
   * If the contract had already been created, its address is returned.
   * This must be called on the original implementation and not a proxy created previously.
   */
  function createSplit(Share[] memory shares) public returns (PercentSplitETH splitInstance) {
    bytes32 salt = keccak256(abi.encode(shares));
    address clone = Clones.predictDeterministicAddress(address(this), salt);
    splitInstance = PercentSplitETH(payable(clone));
    if (!clone.isContract()) {
      emit PercentSplitCreated(clone);
      Clones.cloneDeterministic(address(this), salt);
      splitInstance.initialize(shares);
    }
  }

  /**
   * @notice Returns the address for the proxy contract which would represent the given split terms.
   * @dev The contract may or may not already be deployed at the address returned.
   * Ensure that it is deployed before sending funds to this address.
   */
  function getPredictedSplitAddress(Share[] memory shares) public view returns (address) {
    bytes32 salt = keccak256(abi.encode(shares));
    return Clones.predictDeterministicAddress(address(this), salt);
  }

  /**
   * @notice Called once to configure the contract after the initial deployment.
   * @dev This will be called by `createSplit` after deploying the proxy so it should never be called directly.
   */
  function initialize(Share[] memory shares) public initializer {
    require(shares.length >= 2, "Split: Too few recipients");
    require(shares.length <= 5, "Split: Too many recipients");
    uint256 total;
    for (uint256 i = 0; i < shares.length; i++) {
      total += shares[i].percentInBasisPoints;
      _shares.push(shares[i]);
      emit PercentSplitShare(shares[i].recipient, shares[i].percentInBasisPoints);
    }
    require(total == BASIS_POINTS, "Split: Total amount must equal 100%");
  }

  /**
   * @notice Returns a tuple with the terms of this split.
   */
  function getShares() public view returns (Share[] memory) {
    return _shares;
  }

  /**
   * @notice Returns how many recipients are part of this split.
   */
  function getShareLength() public view returns (uint256) {
    return _shares.length;
  }

  /**
   * @notice Returns a recipient in this split.
   */
  function getShareRecipientByIndex(uint256 index) public view returns (address payable) {
    return _shares[index].recipient;
  }

  /**
   * @notice Returns a recipient's percent share in basis points.
   */
  function getPercentInBasisPointsByIndex(uint256 index) public view returns (uint256) {
    return _shares[index].percentInBasisPoints;
  }

  /**
   * @notice Forwards any ETH received to the recipients in this split.
   * @dev Each recipient increases the gas required to split
   * and contract recipients may significantly increase the gas required.
   */
  receive() external payable {
    _splitETH(msg.value);
  }

  /**
   * @notice Allows any ETH stored by the contract to be split among recipients.
   * @dev Normally ETH is forwarded as it comes in, but a balance in this contract
   * is possible if it was sent before the contract was created or if self destruct was used.
   */
  function splitETH() public {
    _splitETH(address(this).balance);
  }

  function _splitETH(uint256 value) internal {
    if (value > 0) {
      uint256 totalSent;
      uint256 amountToSend;
      unchecked {
        for (uint256 i = _shares.length - 1; i > 0; i--) {
          Share memory share = _shares[i];
          amountToSend = (value * share.percentInBasisPoints) / BASIS_POINTS;
          totalSent += amountToSend;
          share.recipient.sendValue(amountToSend);
          emit ETHTransferred(share.recipient, amountToSend);
        }
        // Favor the 1st recipient if there are any rounding issues
        amountToSend = value - totalSent;
      }
      _shares[0].recipient.sendValue(amountToSend);
      emit ETHTransferred(_shares[0].recipient, amountToSend);
    }
  }

  /**
   * @notice Anyone can call this function to split all available tokens at the provided address between the recipients.
   * @dev This contract is built to split ETH payments. The ability to attempt to split ERC20 tokens is here
   * just in case tokens were also sent so that they don't get locked forever in the contract.
   */
  function splitERC20Tokens(IERC20 erc20Contract) public {
    require(_splitERC20Tokens(erc20Contract), "Split: ERC20 split failed");
  }

  function _splitERC20Tokens(IERC20 erc20Contract) internal returns (bool) {
    try erc20Contract.balanceOf(address(this)) returns (uint256 balance) {
      if (balance == 0) {
        return false;
      }
      uint256 amountToSend;
      uint256 totalSent;
      unchecked {
        for (uint256 i = _shares.length - 1; i > 0; i--) {
          Share memory share = _shares[i];
          bool success;
          (success, amountToSend) = balance.tryMul(share.percentInBasisPoints);
          if (!success) {
            return false;
          }
          amountToSend /= BASIS_POINTS;
          totalSent += amountToSend;
          try erc20Contract.transfer(share.recipient, amountToSend) {
            emit ERC20Transferred(address(erc20Contract), share.recipient, amountToSend);
          } catch {
            return false;
          }
        }
        // Favor the 1st recipient if there are any rounding issues
        amountToSend = balance - totalSent;
      }
      try erc20Contract.transfer(_shares[0].recipient, amountToSend) {
        emit ERC20Transferred(address(erc20Contract), _shares[0].recipient, amountToSend);
      } catch {
        return false;
      }
      return true;
    } catch {
      return false;
    }
  }

  /**
   * @notice Allows the split recipients to make an arbitrary contract call.
   * @dev This is provided to allow recovering from unexpected scenarios,
   * such as receiving an NFT at this address.
   *
   * It will first attempt a fair split of ERC20 tokens before proceeding.
   *
   * This contract is built to split ETH payments. The ability to attempt to make other calls is here
   * just in case other assets were also sent so that they don't get locked forever in the contract.
   */
  function proxyCall(address payable target, bytes memory callData) public onlyRecipient {
    require(!callData.startsWith(type(IERC20Approve).interfaceId), "Split: ERC20 tokens must be split");
    _splitERC20Tokens(IERC20(target));
    target.functionCall(callData);
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        require(_initializing || !_initialized, "Initializable: contract is already initialized");

        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }

        _;

        if (isTopLevelCall) {
            _initializing = false;
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev https://eips.ethereum.org/EIPS/eip-1167[EIP 1167] is a standard for
 * deploying minimal proxy contracts, also known as "clones".
 *
 * > To simply and cheaply clone contract functionality in an immutable way, this standard specifies
 * > a minimal bytecode implementation that delegates all calls to a known, fixed address.
 *
 * The library includes functions to deploy a proxy using either `create` (traditional deployment) or `create2`
 * (salted deterministic deployment). It also includes functions to predict the addresses of clones deployed using the
 * deterministic method.
 *
 * _Available since v3.4._
 */
library Clones {
    /**
     * @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
     *
     * This function uses the create opcode, which should never revert.
     */
    function clone(address implementation) internal returns (address instance) {
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(ptr, 0x14), shl(0x60, implementation))
            mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
            instance := create(0, ptr, 0x37)
        }
        require(instance != address(0), "ERC1167: create failed");
    }

    /**
     * @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
     *
     * This function uses the create2 opcode and a `salt` to deterministically deploy
     * the clone. Using the same `implementation` and `salt` multiple time will revert, since
     * the clones cannot be deployed twice at the same address.
     */
    function cloneDeterministic(address implementation, bytes32 salt) internal returns (address instance) {
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(ptr, 0x14), shl(0x60, implementation))
            mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
            instance := create2(0, ptr, 0x37, salt)
        }
        require(instance != address(0), "ERC1167: create2 failed");
    }

    /**
     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
     */
    function predictDeterministicAddress(
        address implementation,
        bytes32 salt,
        address deployer
    ) internal pure returns (address predicted) {
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(ptr, 0x14), shl(0x60, implementation))
            mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf3ff00000000000000000000000000000000)
            mstore(add(ptr, 0x38), shl(0x60, deployer))
            mstore(add(ptr, 0x4c), salt)
            mstore(add(ptr, 0x6c), keccak256(ptr, 0x37))
            predicted := keccak256(add(ptr, 0x37), 0x55)
        }
    }

    /**
     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
     */
    function predictDeterministicAddress(address implementation, bytes32 salt)
        internal
        view
        returns (address predicted)
    {
        return predictDeterministicAddress(implementation, salt, address(this));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT OR Apache-2.0

pragma solidity ^0.8.0;

interface IERC20Approve {
  function approve(address spender, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT OR Apache-2.0

pragma solidity ^0.8.0;

/**
 * @notice A library for manipulation of byte arrays.
 */
library BytesLibrary {
  /**
   * @dev Replace the address at the given location in a byte array if the contents at that location
   * match the expected address.
   */
  function replaceAtIf(
    bytes memory data,
    uint256 startLocation,
    address expectedAddress,
    address newAddress
  ) internal pure {
    bytes memory expectedData = abi.encodePacked(expectedAddress);
    bytes memory newData = abi.encodePacked(newAddress);
    // An address is 20 bytes long
    for (uint256 i = 0; i < 20; i++) {
      uint256 dataLocation = startLocation + i;
      require(data[dataLocation] == expectedData[i], "Bytes: Data provided does not include the expectedAddress");
      data[dataLocation] = newData[i];
    }
  }

  /**
   * @dev Checks if the call data starts with the given function signature.
   */
  function startsWith(bytes memory callData, bytes4 functionSig) internal pure returns (bool) {
    // A signature is 4 bytes long
    if (callData.length < 4) {
      return false;
    }
    for (uint256 i = 0; i < 4; i++) {
      if (callData[i] != functionSig[i]) {
        return false;
      }
    }

    return true;
  }
}